UV-C Air Steriliser AtmosKlear 200

AtmosKlear UV-C 200 air sterilzers apply the N-Flow technology, a germicidal system based on UV-C radiation.The UV-C radiation with wavelength of 250-280nm has the most emcient bactericidal and virucidal effectiveness from the entire UV electromagnetic range. It destroys bacteria, viruses, mold, fungi and other types of pathogenic microorganisms. The sterilized air leaves the lamp through the upper hole.

Poland - National Institute of Public Health – National Institute of Hygiene Certificate B-BK-60212-0443/20

USA – Registered with US Environmental Protection Agency - Establishment Number 98457-POL-1

Conforming to

BS EN IEC 60598-1 2021 General Requirements and Tests for Luminaires - Given are general requirements for lighting fixtures for electric light sources operating with a supply voltage of up to 1 000 V. The requirements and the corresponding tests include: classification, marking, mechanical and electrical construction

BS EN IEC 60598-2-4:2017 specifies requirements for portable general purpose luminaires for indoor and/or outdoor use (e.g. garden use), other than handlamps, designed to be used with or incorporating electrical light sources on supply voltages not exceeding 250 V.

BS EN 62471 : 2008 gives best-practice recommendations to test the photobiological safety of electric lamps and lighting systems, including luminaires. This standard specifies exposure limits, measurement techniques and classification systems to control photobiological and light hazards. Its specifications cover all lamps and lamp systems from electrically powered sources of optical radiation, including LEDs. By complying with this standard, manufacturers can put the right safety measures in place to protect staff and consumers from physiological and photochemical reactions.

BS EN 55015: 2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

BS EN IEC 61000-3-2:2019 Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions

BS EN 61547 2009 Equipment for general lighting purposes. EMC immunity requirements

BS EN 63000: 2019-01: 2018 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances

CE Declaration EU Compliance and Conformity to LVD/EMC/RoHS directives

LVD 2014/35/EU – Low Voltage Directive – ensures that electrical equipment operating within certain voltage limits provides a high level of protection for citizens.

The LVD covers health and safety risks on electrical equipment operating with an input or output voltage of between

• 50 and 1000 V for alternating current
• 75 and 1500 V for direct current

EMC 2014/30/EU Electro Magnetic Compatibility Directive - all electric devices or installations influence each other when interconnected or close to each other, e.g. interference between TV sets, GSM handsets, radios and nearby washing machine or electrical power lines. The purpose of electromagnetic compatibility (EMC) is to keep all those side effects under reasonable control. EMC designates all the existing and future techniques and technologies for reducing disturbance and enhancing immunity.

RoHS 2015/863/EU - Restriction of Hazardous Substances (RoHS) Directive, also referred to as RoHS 2, controls the use of dangerous materials in electrical and electronic equipment. The RoHS Directive seeks to limit the spread of these substances into the environment as pollutants and reduce occupational exposure during manufacturing and recycling.